---------------------------------------------------------
 VCLRTL.RTP Borland Delphi VCL/RTL source update patch 1
---------------------------------------------------------

---------------
*** Notice ***
---------------
This patch is intended for use only with the Delphi VCL/RTL Source 
Product.  This patch updates the VCL and RTL source code to reflect 
the changes made by the Delphi update patch 1 (DELPHI.RTP).  

The Delphi Client/Server Patch, CSDELPHI.RTP, automatically patches 
the VCL Source in addition to patching Delphi, so if you have 
used CSDELPHI.RTP you do NOT need to use this VCLRTL.RTP patch.

Before using this patch, you must first update Delphi by using the 
Delphi update patch 1, DELPHI.RTP.  Do NOT update the VCL/RTL source 
using this patch if the time stamp on your DELPHI.EXE is 2/15/95 8:00am 
for the US/English version, 2/17/95 8:00 am for German version, or 
3/07/95 8:00am for the French version.

In these cases you must use the DELPHI.RTP patch first. This patch works 
only with PATCH.EXE 2.11.

The resulting file(s) are subject to the terms of the No-nonsense
License Agreement which shipped with the Borland language product
you purchased.

---------------
Instructions
---------------
For simplicity, the following instructions assume you installed
Delphi into the default directory structure of \DELPHI and that
you've copied PATCH.EXE and VCLRTL.RTP into \TEMP on the same
drive.

If you want backup copies of the original files placed into a
directory called \vclrtl.SAV, type:

  cd \temp
  patch -backup:\vclrtl.sav \delphi\source vclrtl.rtp

Otherwise, type:

  cd \temp
  patch \delphi\source vclrtl.rtp

See below for a complete list of the files that will be updated.

---------------
Purpose
---------------
This patch file updates the VCL and RTL source code to correspond to the
version of Delphi that has been updated using Delphi Update Patch 1.

---------------
Files Modified
---------------
BUILD31.PAS 
CONSTS.RC   
CONSTS.RC   
DB.PAS      
DBCONSTS.RC 
DBCONSTS.RC 
DBCONSTS.RES
DBCTRLS.PAS 
DBTABLES.PAS
DISPATCH.PAS
DSGNINTF.PAS
FORMS.PAS   
GRIDS.PAS   
OLE2.PAS    
OUTLINE.PAS 
PENWOEM.PAS 
STDCTRLS.PAS
SYSUTILS.RC 
TOCTRL.PAS  
VCL.INC     

---------------
Files Added
---------------
TOCONSTS.RC 
TOCONSTS.RES
LISEZVCL.TXT
VCLINFO.TXT 

---------------
Troubleshooting
---------------
The following troubleshooting information is provided by
PocketSoft for their RTPatch PATCH.EXE, version 2.11.

If PATCH.EXE is unable to locate the correct files to
patch, you will see the message:

       Warning wpt0015: Old File does not exist

This may indicate one of the following cases:

1) You have previously deleted one or more files from your
   installation that PATCH.EXE has attempted to patch.  In 
   this case, PATCH.EXE will skip the files you have deleted.  
   If you wish to replace a missing file, you must first 
   reinstall from your master diskettes before applying the 
   patch.

2) You have not specified the correct directroy for Delphi
   when you executed the PATCH command. In this case, verify
   the directory name and make sure PATCH.EXE and the RTP
   patch file on the same drive and directory.

3) When you installed you chose not to install one or more of 
   the files that PATCH.EXE has attempted to patch.  In this case, 
   PATCH.EXE will skip the files you did not install.  If you wish 
   to add a missing file, you must first install from your master 
   diskettes before applying the patch.

PATCH.EXE will report the following message if it
determines that a file does not need to be patched:

       New Version of File 'FILENAME' already exists.

This may indicate one of the following cases:

1) You have purchased a recent copy of the software in
   which the software changes have already been introduced.

2) You have already applied the patch.

In either case, PATCH.EXE has verified that your software is
up to date and you need not take further action.

error ept0001: Illegal Input Option '<Option>'
----------------------------------------------
The specified option is either an invalid option or the PATCH user
does not have the user level to allow the use of the option.

error ept0002: Insufficient Memory
----------------------------------
PATCH needs a certain amount of memory free for its internal tables.
There was insufficient memory available when PATCH was run.

error ept0003: Valid Password not entered. Patch File can not be applied
------------------------------------------------------------------------
The PATCH user did not enter the valid password for this patch file.
Remember that passwords are case sensitive. 

error ept0004: Specified Update Directory '<DirName>' does not exist
--------------------------------------------------------------------
The PATCH user specified a directory to update but that directory
does not exist.

error ept0005: Specified [Update|Backup] Directory '<DirName>' is
               not a valid directory.
-----------------------------------------------------------------
The user specified a directory name either for the Update or the
Backup directory that is not a valid directory name. An existing file
with the same name as the specified directory could cause this message.

error ept0006: Can Not Find Patch File '<FileName>'
---------------------------------------------------
PATCH was not able to locate the specified PATCH file.

error ept0007: Error Opening Patch File
---------------------------------------
PATCH was able to locate the patch file but could not open the file
to read from it. This could be a DOS error or a corrupted disk.

error ept0008: PATCH.EXE and Patch File incompatible - Need to
               update PATCH.EXE
--------------------------------------------------------------
PATCH.EXE and the patch file are incompatible versions. PATCH.EXE can
update any old versions of patch files but not ones created with a
newer version of the data file format. You need to get a newer version
of the PATCH program to apply this patch.

error ept0009: Invalid Patch File '<Name>'
------------------------------------------
PATCH.EXE was unable to read correct information from the patch file.
The specified file is either not a patch file or has been corrupted.
Get a new copy of the file and rerun PATCH.

error ept0010: Failure Creating Backup Directory '<DirName>'
------------------------------------------------------------
PATCH was unable to create the specified Backup Directory.

error ept0011: Failure Creating Backup Log File '<FileName>'
------------------------------------------------------------
PATCH was unable to create the file containing information about what
files were backed up.

error ept0012: Failure Opening Backup Source File '<FileName>'
--------------------------------------------------------------
PATCH was unable to open the file to be backed up. 

error ept0013: Failure Opening Backup Destination File '<FileName>'
-------------------------------------------------------------------
PATCH was unable to open the new file to copy the original file to.

error ept0014: Failure Writing Backup File '<FileName>'
-------------------------------------------------------
PATCH was unable to write the original file to the backup version.

error ept0015: Old File does not exist
--------------------------------------
PATCH needs bytes from the existing version of a  file in order to
build the new file. However, it was unable to locate the old file.

error ept0016: New File already exists.
---------------------------------------
There already exists a file by the same name as the new file being
built. The existing file will be copied to the backup directory if
the BACKUP option is on.

error ept0017: Failure Opening Old File: 'filename'
---------------------------------------------------
PATCH was able to locate the old version of a file but the open
failed. This is probably caused by a DOS error. Try rerunning PATCH.

error ept0018: Failure Opening New File: '<FileName>'
-----------------------------------------------------
PATCH was unable to open the named file. It was attempting to open
this file to create a file for the updated version of the system.
This can be caused by a disk or network error or if a directory exists
by the same name as the file that PATCH is trying to open.

error ept0019: Failure Writing to File
--------------------------------------
An error occurred while PATCH was trying to write bytes to a new
file.

error ept0020: Failure Reading from File
----------------------------------------
An error occurred while PATCH was trying to read bytes from an old
file.

error ept0021: Failure Seeking to Position in File
--------------------------------------------------
PATCH was unable to seek to a position within a file. This is probably
caused by a DOS error or corrupted disk.  Retry running the patch.

error ept0022: Failure Renaming File
------------------------------------
PATCH was unable to rename a file. This is probably caused by a DOS
error or corrupted disk. Try rerunning PATCH.

error ept0023: Patch for '<FileName>' not found in Patch File
-------------------------------------------------------------
PATCH was unable to find an entry in the patch file matching
the entry name specified by the user on the FILE option. Try using
the LIST option to get a list of the entries in the patch file.

error ept0024: New File already exists.
---------------------------------------
The specified file has already been patched. PATCH does not need
to patch this file.

error ept0025: Verify of New File Failed. Possible Internal Error.
------------------------------------------------------------------
The file PATCH built is not valid. Users should never see this
message.

error ept0026: Failure Creating Overflow File: 'FileName'
----------------------------------------------------------
PATCH was unable to open a file for its overflow information. This is
probably cause by a DOS error or by a full disk drive.

error ept0027: Overflow File Write Failure
------------------------------------------
PATCH was unable to read from the overflow table it created to hold
data that did not fit in its internal tables. This was probably
caused by some sort of DOS error or a corrupted disk or there was
insufficient room on the disk for the file.

error ept0028: Overflow File Read Failure
-----------------------------------------
PATCH was unable to read from the overflow table it created to hold
data that did not fit in its internal tables. This was probably
caused by some sort of DOS error or a corrupted disk.

error ept0029: Insufficient Disk Space to Apply Patch - You need
               at least <Size> bytes free on drive <DriveLetter>
               for <Feature>.
----------------------------------------------------------------
PATCH needs at least the specified number of bytes to perform the 
patch process. If UNDO or BACKUP is ON, PATCH needs room to backup
all of the file making up the original system and also the room 
needed to build the new system. If both BACKUP and UNDO are OFF,
PATCH only needs room to backup the biggest of the files being
patched.

error ept0030: Error opening serialization file '<FileName>'
------------------------------------------------------------
PATCH either could not find the serialization file or the open
failed. If the open failed, the probable cause is some kind of DOS
error, retry the operation.

error ept0031: Error reading serialization file '<FileName>'
------------------------------------------------------------
PATCH cannot seek to the correct position in the serialization file
or read the correct number of bytes from the file. Possible causes
are invalid positions and lengths specified while running PATCHBLD.

error ept0032: Failure Setting File's Time/Date Stamp
-----------------------------------------------------
PATCH was unable to set the time/date stamp for the updated
file or for a file freshly backed up. This error should never 
occur but if it does would probably be caused by some kind of
disk failure or network file sharing problem.

error ept0033: Failure creating temporary file.
-----------------------------------------------
PATCH was unable to create a temporary file to hold the new file
or to hold overflow information. Try rerunning PATCH and if it still
does not work reduce the number of temporary files required by
disabling BACKUP and UNDO.

error ept0034: Neither command line parameter specifed is an 
               existing directory
------------------------------------------------------------
Multiple parameters were given on the PATCH command line that were neither
valid PATCH options or existing directories. If the user specifies multiple
parameters, at least one must be a valid existing update directory.

error ept0035: Only one file and one directory may be specified on 
               command line
------------------------------------------------------------------
The user specified more than one patch file and one update directory on the
PATCH command line.

error ept0036: Old file not found. However, a file of the same name was
               found. No update done since file contents do not match.
-----------------------------------------------------------------------
PATCH was unable to locate an exact match for the original file to 
be updated. However, PATCH was able to locate a file with the same
name as the original file. However, the file found did not have either
the same size or checksum as the actual original file that PATCH is
seeking in order to perform the update.

error ept0037: Error opening error message file.
------------------------------------------------
PATCH was unable to open the file PATCH.ERR for storing error messages.
The probable cause is some kind of DOS error, retry the operation or specify
the NOERRORFILE option on the PATCH command line.

   NOTE: When an error occurs at PATCH time, the PATCH program will return
         an error code equal to the error message that is printed. If the
         error is an error of the EUT type below, the exit code will be
         equal to the indicated error number plus 100.